Welcome!

This community is for professionals and enthusiasts of our products and services. Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

0

How to a Warm Boot, Cold Boot and Clean Boot on a CK3 WM6.1? How to reset the Intermec CK3 WM6.1 to factory defaults?

Par
François MARTINEZ
sur 25/07/2017 06:36 435 Vues

CK3 - Reset (Warm Boot)

Preferred reset for the CK3: Press and hold the Power button ( yellow button)  until the screen goes blank.
RAM is cleared but no settings or applications are lost.


CK3 - Secondary Reset (Cold Boot)

If the preferred reset method does not restore the CK3,  the battery needs to be removed. There is a small black round button at the top of the battery compartment of the unit. Press and hold that button for about 3 seconds and then re-insert the battery; do not touch any key. The unit will turn itself on, and will reset.
No settings, files nor  applications will be lost.


CK3 - Clean Boot (without the CK3_Automated_CleanBootPatch.cab)

To clean boot the CK3, the battery must be removed. There is a small black round button at the top of the battery compartment of the unit. Press and hold that button for about 1 seconds and then re-insert the battery. As soon as the battery is inserted, press and hold the Power button (yellow button) until a message on the screen asks to clean boot. Press the button indicated on screen to clean boot. (scanner button, or press the trigger on the scan handle will accept the clean boot) RAM is cleared, all settings and applications are removed if not part of the 'SSPB' folder.
 
CK3 - Clean Boot (with the CK3_Automated_CleanBootPatch.cab, unit that has the patch install will have a bootloader of 3.45.26.0041A, Warm Boot to unit to see the Bootloader version)
To clean boot the CK3, the battery needs to be removed. There is a small black round button at the top of the battery compartment of the unit. Press and hold that button for about 1 seconds and then re-insert the battery. As soon as the battery is inserted, press and hold the Power (yellow key) and the 'PTT' button (to the right of the scan button) until a message on the screen asks to clean boot. Press the button indicated on screen to clean boot. (scanner button, or press the trigger on the scan handle will accept the clean boot). RAM is cleared, all settings and applications will be removed if not part of the SSPB folder.

Votre réponse

Veuillez essayer de donner une réponse substantielle. Si vous voulez commenter la question ou la réponse, utilisez simplement l'outil de commentaire. Rappelez-vous que vous pouvez toujours réviser vos réponses - pas besoin de répondre deux fois à la même question. Aussi n'oubliez pas de voter - cela aide vraiment à sélectionner les meilleures questions et réponses!

Se tenir informé

A propos de ces forums

Ce forum s'adresse aux professionnels et amateurs des produits HONEYWELL. Lire les lignes de conduite

Outils de question

1 Abonné(e)s

Statistiques

Posée: 25/07/2017 06:36
Vu: 435 fois
Dernière mise à jour: 25/07/2017 06:36